TankRatio

Home › Calculators › Tank volume

Fish Tank Volume Calculator

Pick your tank shape (8 shapes, including flat-back hex and corner pentagon) and enter its measurements in inches or centimetres. You get the volume in US gallons, UK gallons and litres, plus the weight of the water. For a rectangular tank, the rule is length × width × height ÷ 231 (in inches) to get US gallons.

Tank volume calculator

Drawn to scale from your numbers.

Tank shape
Measurements
Units
Common tanks
Substrate and decor (for your exact water)
in
%

Light decor is about 5%, a rock-heavy aquascape 10–20% (rough guide). Need the substrate amount? Use the substrate calculator.

10.4US gallons

Actual water once set up: about 8.8–9.4 US gal estimate

Litres
39.3
UK (imperial) gallons
8.7
Water weight
87 lb
US gallons
–
Embed this calculator

Next for your 10-gallon tank

  • Heater size: wattage for your volume and room temperature
  • Substrate: how much gravel or sand for your footprint
  • Stocking: how many fish, with a tank-mate check
  • Tank weight: full weight including glass and substrate

How the calculator works

Every shape works the same way: find the area of the tank's footprint (seen from above), multiply by the water height, then convert cubic inches or cubic centimetres into gallons and litres.

Volume = footprint area × height US gallons = cubic inches ÷ 231 Litres = cubic centimetres ÷ 1,000 (1 US gal = 3.785 L, 1 UK gal = 4.546 L) Water weight ≈ 8.34 lb per US gallon ≈ 1 kg per litre (fresh water)

Both conversions are exact by definition: the US gallon is 231 cubic inches (NIST Handbook 44, Appendix C), and 1 in = 2.54 cm, so 1 US gallon = 3.785411784 litres.

Rectangle

Area = length × width

Worked example: a standard 10-gallon tank measures 20 × 10 × 12 in. 20 × 10 × 12 = 2,400 in³. 2,400 ÷ 231 = 10.4 US gal (39.3 L). See the full 10 gallon tank dimensions.

Cylinder

Area = π × (diameter ÷ 2)²

Worked example: 12 in across, 18 in tall. Radius 6 in, so area = 3.1416 × 36 = 113.1 in². × 18 = 2,035.8 in³ ÷ 231 = 8.8 US gal (33.4 L).

Bow-front

A bow-front is a rectangle (using the depth at the sides) plus the curved "bow" in front. We treat the bow as a slice of a circle whose chord is the tank length and whose bulge is the centre depth minus the side depth.

bulge s = centre depth − side depth circle radius R = (length²/4 + s²) ÷ (2 × s) bow area = R² × arccos((R − s)/R) − (R − s) × √(2Rs − s²) Area = length × side depth + bow area

Worked example: 36 in long, 12 in deep at the sides, 16 in deep at the centre, 20 in tall. s = 4; R = (324 + 16) ÷ 8 = 42.5 in; bow area = 96.9 in². Area = 432 + 96.9 = 528.9 in². × 20 = 10,578.8 in³ ÷ 231 = 45.8 US gal (173.4 L).

Half-cylinder

A half-cylinder has a flat back (the full diameter) and a half-round front.

Area = π × (back width ÷ 2)² ÷ 2

Worked example: 36 in across the back, 20 in tall. 3.1416 × 18² ÷ 2 = 508.9 in². × 20 = 10,178.8 in³ ÷ 231 = 44.1 US gal (166.8 L).

Hexagon

For a regular hexagon (all six glass panels the same width):

Area = 2.598 × side² (exactly 3√3 ÷ 2 × side²)

Worked example: panels 10 in wide, 24 in tall. 2.598 × 100 = 259.8 in². × 24 = 6,235.4 in³ ÷ 231 = 27.0 US gal (102.2 L).

Flat-back hexagon

A flat-back hex has a straight back, two short straight side panels, two angled panels and a front panel. Split it into a rectangle at the back and a trapezoid at the front.

Area = back length × side depth + (back length + front panel) ÷ 2 × (total depth − side depth)

Worked example: back 36 in, total depth 15 in, front panel 18 in, side panels 6 in deep, 20 in tall. 36 × 6 = 216; (36 + 18) ÷ 2 × 9 = 243. Area = 459 in². × 20 = 9,180 in³ ÷ 231 = 39.7 US gal (150.4 L).

Corner (quarter-circle)

For a corner tank whose front is a quarter circle; the radius is the length along each back wall.

Area = π × radius² ÷ 4

Worked example: 24 in along each back wall, 20 in tall. 3.1416 × 576 ÷ 4 = 452.4 in². × 20 = 9,047.8 in³ ÷ 231 = 39.2 US gal (148.3 L).

Corner pentagon

A corner pentagon sits in a room corner: two back walls of equal length, a short side panel at each end, and one angled front panel. It is a square with one corner cut off.

Area = back wall² − (back wall − side panel)² ÷ 2

Worked example: back walls 24 in, side panels 8 in, 20 in tall. 576 − 16² ÷ 2 = 576 − 128 = 448 in². × 20 = 8,960 in³ ÷ 231 = 38.8 US gal (146.8 L).

Your exact water: substrate and decor

Open "Substrate and decor" to get your own figure instead of the estimate range. The calculator takes the substrate out of the height, then removes the share taken by rock and decor.

Your water = footprint area × (water height − substrate depth) × (1 − decor % ÷ 100)

Worked example: a 75 gallon at 48 × 18 in inside, water 20 in deep, 2 in of sand, rock taking 10%. 48 × 18 × 18 = 15,552 in³. × 0.9 = 13,996.8 in³ ÷ 231 = 60.6 US gal (229.4 L), against 74.8 gal with nothing in it.

Label vs real water: 3 worked examples

Here is the same method on three common tanks, from Aqueon's published outside sizes. We assume the glass thickness shown (an estimate), a 1 in gap below the rim and 2 in of sand.

10 gallon (20¼ × 10½ × 129⁄16 in, 3⁄16 in glass): inside 19⅞ × 10⅛ in, water 9⅜ in deep. 19.875 × 10.125 × 9.375 = 1,886.6 in³ ÷ 231 = 8.2 US gal (30.9 L), against 11.6 gal outside.

29 gallon (30¼ × 12½ × 18¾ in, ¼ in glass): inside 29¾ × 12 in, water 15½ in deep. 29.75 × 12 × 15.5 = 5,533.5 in³ ÷ 231 = 24.0 US gal (90.7 L), against 30.7 gal outside.

55 gallon (48¼ × 12¾ × 21 in, 5⁄16 in glass): inside 47⅝ × 12⅛ in, water 1711⁄16 in deep. 47.625 × 12.125 × 17.6875 = 10,213.7 in³ ÷ 231 = 44.2 US gal (167.4 L), against 55.9 gal outside.

TankOutside volumeReal waterShare of label
10 gallon11.6 gal (43.8 L)8.2 gal (30.9 L)82%
29 gallon30.7 gal (116.2 L)24.0 gal (90.7 L)83%
55 gallon55.9 gal (211.7 L)44.2 gal (167.4 L)80%

All 25 standard sizes are worked out the same way on the aquarium sizes chart. How we source and check every figure: our method.

How to measure your tank

  • Measure the inside of the glass if you can. Outside measurements include the glass, so they slightly overstate the volume.
  • For height, measure to the water line you actually keep, not the rim.
  • Metric users: enter centimetres; the calculator converts everything.

FAQ

Why does my tank hold less water than its label says?

Tank sizes are usually rounded and based on outside dimensions. Glass thickness, substrate, rocks, decor and the gap below the rim all take up space, so the water you actually have is typically around 10–15% less than the calculated volume (an estimate; it depends on how much hardscape you use). Our 75 gallon page shows a worked example.

Should I use inside or outside measurements?

Inside measurements are more accurate. If you only have the maker's outside dimensions, the result will be a little high, so treat it as an upper limit.

How many litres are in a gallon?

One US gallon is 3.785 litres. One UK (imperial) gallon is 4.546 litres. Most US tank labels use US gallons.

How much does the water in my aquarium weigh?

Fresh water weighs about 8.34 lb per US gallon, or 1 kg per litre. Salt water is slightly heavier. The glass, stand, substrate and rock add more on top, so check the full weight before choosing a stand or floor spot.

How do I measure a hexagon tank?

Enter the width of one glass panel. If you can only measure straight across from one corner to the opposite corner, divide that by 2: for a regular hexagon, that equals the panel width.

Put this calculator on your site

Show the free embed code

Free for forums, blogs and aquarium club sites. Paste this code into your page:

Related calculators